-

Abdi, Y., Khanlari, G.R., 2019. Estimation of mechanical properties of sandstones using P-wave velocity and Schmidt hardness. New Finding Applied Geology, 13: 33-47.
Abdi, Y., Khanlari, G.R., Jamshidi, A., 2024. Correlation between mechanical properties of sandstones and P-wave velocity in different degrees of saturation. Geotechnical and Geological Engineering,42: 665-674.
Ahmed, W., Ahmad, N., Janjuhah, H.T., Islam, I., Sajid, M., Kontakiotis, G., 2023. The evaluation of non-destructive tests for the strength and physical properties of granite, marble, and sandstone: a case study from North Pakistan. Quaternary, 6:4.
Ajalloeian, R., Jamshidi, A., Khorasani, R., 2024. Evaluating the effects of mineral grain size and mineralogical composition on the correlated equations between strength and Schmidt hardness of granitic rocks. Geotechnical and Geological Engineering, 42: 675-685.
Akbay, D., 2023. Investigating the accuracy of specimen shape for point load index test in predicting the uniaxial compressive strength for rocks using regression analysis and machine learning. Mining, Metallurgy and Exploration, 40: 2107-2115.
Azadmehr, A., Saffarian, M., Kazemi, S.M., 2021. Proposing regression models to estimate uniaxial compressive strength and elastic modulus of the sandstones based on physical properties and compressional wave velocity. Civil Infrastructure Researches, 6: 149-170.
Azimian, A., Ajalloeian, R., 2015. Empirical correlation of physical and mechanical properties of marly rocks with P wave velocity. Arabian Journal of Geosciences, 8: 2069-2079.
Basu, A., Kamran, M., 2010. Point load test on schistose rocks and its applicability in predicting uniaxial compressive strength. International Journal of Rock Mechanics and Mining Sciences, 47: 823-828.
Celik, S.B., 2019. Prediction of uniaxial compressive strength of carbonate rocks from nondestructive tests using multivariate regression and LS-SVM methods. Arabian Journal of Geosciences, 12: 193.
Cherifi, H., Chaouni, A.A., Fattah, G., Jalouni, A., Jabri, I., El-Asmi, H., Raini, I., 2021. Physicomechanical characterization of schists in Tazzeka complex [Taza Province, Eastern Morocco]. Case Studies in Construction Materials, 15: e00692.
Cobanoglu, I., Celik, S.B., 2008. Estimation of uniaxial compressive strength from point load strength, Schmidt hardness and P-wave velocity. Bulletin of Engineering Geology and the Environment, 67: 491-498.
Diamantis, K., Bellas, S., Migiros, G., Gartzos, E., 2011. Correlating wave velocities with physical, mechanical properties and petrographic characteristics of peridotites from the Central Greece. Geotechnical and Geologicalngineering,29:1049-1062.
Fener, M., Kahraman, S., Bilgil, A., Gunaydin, O., 2005. A comparative evaluation of indirect methods 394 Jamshidi et al.
to estimate the compressive strength of rocks. Rock Mechanics and Rock Engineering, 38: 329-343.
Fereidooni, D., Sousa, L., 2022. Predicting the engineering properties of rocks from textural characteristics using some soft computing approaches. Materials, 15: 7922.
Gokceoglu, C., 1996. An evaluation on the reliability of uniaxial compressive strength data estimated by using the Schmidt hammer hardness. Jeoloji Muhendisi, 48: 78-81.
Haramy, K.Y., DeMarco, M.J., 1985. Use of Schmidt hammer for rock and coal testing. 26th US Sympusim on Rock Mechanics, pp. 549-555.
Heidari, M., Khanlari, G.R., Torabi-Kaveh, M., Karegarian, S., 2012. Predicting the uniaxial compressive and tensile strengths of gypsum rock by point load testing. Rock Mechanics and Rock Engineering, 45: 265-273.
IAEG., 1979. Classification of rocks and soils for engineering geological mapping part 1: Rock and Soil Materials. Bulletin of the International Association of Engineering Geology, 19: 364-371.
ISRM., 1978. Suggested methods for determining hardness and abrasiveness of rocks. International journal of rock mechanics and mining sciences & geomechanics abstracts, 15: 89-98.
ISRM (1981) Rock characterization testing and monitoring. ISRM suggested methods. Pergamon Press, Oxford.
Jamshidi, A., Nikudel, M.R., Khamehchiyan, M., Zarei Sahamieh, R., 2016. The effect of specimen diameter size on uniaxial compressive strength, P-wave velocity and the correlation between them. Geomechanics and Geoengineering, An International Journal, 11: 13-19.
Jamshidi, A., Yazarloo, R., Gheiji, S., 2018a. Comparative evaluation of Schmidt hammer test procedures for prediction of rocks strength. International Journal of Mining and Geo-Engineering, 52: 199-206.
Jamshidi, A., Zamanian, H., Zarei Sahamieh, R., 2018b. The effect of density and porosity on the correlation between uniaxial compressive strength and P-wave velocity. Rock Mechanics and Rock Engineering, 51: 1279-1286.
Jobli, A.F., Hampden, A.Z., Tawie, T., 2017. The role of ultrasonic velocity and Schmidt hammer hardness - The simple and economical non-destructive test for the evaluation of mechanical properties of weathered granite. AIP Conference Proceedings, 1875:030005.
Kahraman, S., 2001. Evaluation of simple methods for assessing the uniaxial compressive strength of rock. International Journal of Rock Mechanics and Mining Sciences, 38: 981-994.
Karaman, K., Kesimal, A., Ersoy, H., 2015. A comparative assessment of indirect methods for estimating the uniaxial compressive and tensile strength of rocks. Arabian Journal of Geosciences, 8: 2393-2403.
Katz, O., Reches, Z., Roegiers, J.C., 2000. Evaluation of mechanical rock properties using a Schmidt hammer. International Journal of Rock Mechanics and Mining Sciences, 37: 723-728.
Khandelwal, M., 2013. Correlating P-wave velocity with the physicomechanical properties of different rocks. Pure and Applied Geophysics, 170: 507-514.
Kilic, A., Teymen, A., 2008. Determination of mechanical properties of rocks using simple methods. Bulletin of Engineering Geology and the Environment, 67: 237-244.
Lashkaripour, G.R., 2002. Predicting mechanical properties of mudrock from index parameters. Bulletin of Engineering Geology and the Environment, 61: 73-77.
Minaeian, B., Ahangari, K., 2013. Estimation of uniaxial compressive strength based on P-wave and Schmidt hammer rebound using statistical method. Arabian Journal of Geosciences, 6: 1925-1931.
Rahimi, M.R., Mohammadi, S.D., Beydokhti, A.T., 2022. Correlation between Schmidt hammer hardness, strength properties and mineral compositions of sulfate rocks. Geotechnical and Geological Engineering, 40: 545-574.
Sadeghi, E., Nikudel, M.R., Khamehchiyan, M., Kavussi, A., 2022. Estimation of unconfined compressive strength (UCS) of carbonate rocks by index mechanical tests and specimen size properties: Central Alborz Zone of Iran. Rock Mechanics and Rock Engineering 55: 125-145.
Saldana, M., Gonzalez, J., Perez-Rey, I., Jeldres, M., Toro, N., 2020. Applying statistical analysis and machine learning for modeling the UCS from P-wave velocity, density and porosity on dry travertine. Applied Sciences, 10: 4565.
Sarkar, K., Vishal, V., Singh, T.N., 2012. An empirical correlation of index geomechanical parameters with the compressional wave velocity. Geotechnical and Geological Engineering, 30: 469-479.
Sengun, N., Altindag, R., Demirdag, S., Yavuz, H., 2011. P-wave velocity and Schmidt rebound Geopersia 2024, 14(2): 379-395 395
hardness value of rocks under uniaxial compressional loading. International Journal of Rock Mechanics and Mining Sciences, 48: 693-696.
Sharma, P.K., Singh, T.N., 2008. A correlation between P-wave velocity, impact strength index, slake durability index and uniaxial compressive strength. Bulletin of Engineering Geology and the Environment, 67: 17-22.
Singh, R.N., Hassani, F.P., Elkington, P.A.S., 1983. The application of strength and deformation index testing to the stability assessment of coal measures excavations. The 24th U.S. Symposium on Rock Mechanics (USRMS), College Station, Texas, 599-609.
Song, H., Zhao, Y., Noraei Danesh, N., Jiang, Y., Li, Y., 2020. Uniaxial compressive strength estimation based on the primary wave velocity in coal: considering scale effect and anisotropy. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1-120.
Stoodley, K.D.C., Lewis, T., Stainton, C.L.S., 1980. Applied statistical techniques. England: Ellis Horwood.
Teymen, A., 2021. Statistical models for estimating the uniaxial compressive strength and elastic modulus of rocks from different hardness test methods. Heliyon, 7: e06891.
Tuğrul, A., Zarif, I.H., 1999. Correlation of mineralogical and textural characteristics with engineering properties of selected granitic rocks from Turkey. Engineering Geology, 51: 303-317.
Tumac, D., 2015. Predicting the performance of large diameter circular saws based on Schmidt hammer and other properties for some Turkish carbonate rocks. International Journal of Rock Mechanics and Mining Sciences, 75: 159-168.
Valido, J., Caceres, J.M., Sousa, L., 2024. Mechanical properties of ignimbrites of Tenerife Island employed as building stone and their correlation with some physical properties. Journal of Building Engineering, 82: 108222.
Vaziri-Moghaddam, H., Kimiagari, M., Taheri, A., 2006. Depositional environment and sequence stratigraphy of the Oligo-Miocene Asmari Formation in SW Iran. Facies, 52: 41-51.
Yagiz, S., 2009. Predicting uniaxial compressive strength, modules of elasticity and index properties of rocks using Schmidt hammer. Bulletin of Engineering Geology and the Environment, 68: 55-63.
Yasar, E., Erdogan, Y., 2004a. Correlating sound velocity with the density, compressive strength and Young’s modulus of carbonate rocks. International Journal of Rock Mechanics and Mining Sciences, 41: 871-875.
Yasar, E., Erdogan, Y., 2004b. Estimation of rock physicomechanical properties using hardness methods. Engineering Geology, 71: 281-288.
Yavuz, H., Ugur, I., Demirdag, S., 2008. Abrasion resistance of carbonate rocks used in dimension stone industry and correlations between abrasion and rock properties. International Journal of Rock Mechanics and Mining Sciences, 45: 260-267.
Yilmaz, I., Sendir, H., 2002. Correlation of Schmidt hammer rebound number with unconfined compressive strength and Young’s modulus in gypsum from Sivas (Turkey). Engineering Geology, 66: 211-219.
Yurdakul, M., Ceylan, H., Akdas, H., 2011. A predictive model for uniaxial compressive strength of carbonate rocks from Schmidt hardness. Proc. 45th US Rock Mechanics/Geomechanics Symposium. ARMA, American Rock Mechanics Association. At: San Francisco, CA ABD.
Zhang, J., Shen, Y., Yang, G., Zhang, H., Wang, Y., Hou, X., Sun, Q., Li, G., 2021. Inconsistency of changes in uniaxial compressive strength and P-wave velocity of sandstone after temperature treatments. Journal of Rock Mechanics and Geotechnical Engineering 13: 143-153.