-

نوع مقاله : مقاله پژوهشی

موضوعات


Alm, O., Jaktlund, L.L., Shaoquan, K., 1985. The influence of microcrack density on the elastic and
fracture mechanical properties of Stripa granite. Physics of the Earth and Planetary Interiors, 40: 161-
179.
Aman, M., Espinoza, D.N., Ilgen, A.G., Major, J.R., Eichhubl, P., Dewers, T.A., 2018. CO2‐induced
chemo‐mechanical alteration in reservoir rocks assessed via batch reaction experiments and scratch
testing. Greenhouse Gases: Science and Technology, 8: 133-149.
Blake, O.O., Faulkner, D.R., 2016. The effect of fracture density and stress state on the static and
dynamic bulk moduli of Westerly granite. Journal of Geophysical Research: Solid Earth, 121: 2382-
2399.
Chaki, S., Takarli, M., Agbodjan, W.P., 2008. Influence of thermal damage on physical properties of a
granite rock: porosity, permeability and ultrasonic wave evolutions. Construction and Building
Materials, 22: 1456-1461.
Chandrasekharam, D., Pabasara Kumari, W.G., Avanthi Isaka, B.L., Gamage, R.P., Rathnaweera, T.D.,
Anne Perera, M.S., 2018. An influence of thermally-induced micro-cracking under cooling treatments:
Mechanical characteristics of Australian granite. Energies, 11: 1338.
Costa, K. O. B., Xavier, G. C., Marvila, M. T., Alexandre, J., Azevedo, A. R. G., Monteiro, S. N., 2021.
Influence of high temperatures on physical properties and microstructure of gneiss. Bulletin of
Engineering Geology and the Environment. 80(9): 7069-7081.
Darot, M., Gueguen, Y., Baratin, M.L., 1992. Permeability of thermally cracked granite. Geophysical
Research Letters, 19: 869-872.
Fahimifar, A., Soroush, H., 2001. Rock mechanic test: theoretical aspects and standards. A Publication
of Amirkabir University of Technology, 719 pp. (in Persian)
Freire-Lista, D.M., Fort, R., Varas-Muriel, M.J., 2016. Thermal stress-induced microcracking in
building granite. Engineering geology, 206: 83-93.
Gao, J., Fan, L., Xi, Y., Du, X. 2022. Effects of cooling thermal shock on the P-wave velocity of granite
and its microstructure analysis under immersion in water, half immersion in water, and near-water
cooling conditions. Bulletin of Engineering Geology and the Environment, 81(1): 1-13.
Ge, S., Shi, B., Zhang, S., Zhai, X., Wu, C., 2022. Thermal damage and mechanical properties of high
temperature sandstone with cyclic heating–cooling treatment. Bulletin of Engineering Geology and
the Environment, 81(7): 1-13.
Gomah, M. E., Li, G., Bader, S., Elkarmoty, M., Ismael, M. 2021. Damage evolution of granodiorite
after heating and cooling treatments. Minerals, 11(7): 779.
Gomah, M. E., Li, G., Sun, C., Jiahui, X., Sen, Y., Jinghua, L., Elkarmoty, M., 2022. Macroscopic and
microscopic research on Egyptian granodiorite behavior exposed to the various heating and cooling
strategies. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 8(5): 1-22.
Griffiths, L., Heap, M.J., Baud, P., Schmittbuhl, J., 2017. Quantification of microcrack characteristics
120 Ahmadi et al.
and implications for stiffness and strength of granite. International Journal of Rock Mechanics and
Mining Sciences, 100: 138-150.
Guo, T.Y., Wong, L.N.Y., Wu, Z., 2021. Microcracking behavior transition in thermally treated granite
under mode I loading. Engineering Geology, 282: 105992.
Homand-Etienne, F., Houpert, R., 1989. Thermally induced microcracking in granites: characterization
and analysis. In International Journal of Rock Mechanics and Mining Sciences & Geomechanics
Abstracts, 26: 125-134. Pergamon.
Isaka, B.L.A., Gamage, R.P., Rathnaweera, T.D., Perera, M.S.A., Chandrasekharam, D., Kumari,
W.G.P., 2018. An influence of thermally-induced micro-cracking under cooling treatments:
mechanical characteristics of Australian granite. Energies, 11: 1338.
Kahraman, S. A. İ. R., 2001. Evaluation of simple methods for assessing the uniaxial compressive
strength of rock. International Journal of Rock Mechanics and Mining Sciences, 38(7): 981-994.
Khan, H., Sajid, M., 2023. Investigating the textural and physico-mechanical response of granites to
heat treatment. International Journal of Rock Mechanics and Mining Sciences, 161: 105281.
Kumari, W.G.P., Beaumont, D.M., Ranjith, P.G., Perera, M.S.A., Isaka, B.A., Khandelwal, M., 2019.
An experimental study on tensile characteristics of granite rocks exposed to different hightemperature
treatments. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 5: 47-
64.
Liu, H., Zhang, K., Liu, T., Cao, H., Wang, Y., 2022. Experimental and numerical investigations on tensile
mechanical properties and fracture mechanism of granite after cyclic thermal shock. Geomechanics
and Geophysics for Geo-Energy and Geo-Resources, 8(1): 1-22.
Meng, Q. B., Qian, W., Liu, J. F., Zhang, M. W., Lu, M. M., Wu, Y., 2020. Analysis of triaxial
compression deformation and strength characteristics of limestone after high temperature. Arabian
Journal of Geosciences, 13(4): 1-14.
Nara, Y., Morimoto, K., Yoneda, T., Hiroyoshi, N., Kaneko, K., 2011. Effects of humidity and
temperature on subcritical crack growth in sandstone. International Journal of Solids and
Structures, 48: 1130-1140.
Nasseri, M.H.B., Schubnel, A., Young, R.P., 2007. Coupled evolutions of fracture toughness and elastic
wave velocities at high crack density in thermally treated Westerly granite. International Journal of
Rock Mechanics and Mining Sciences, 44: 601-616.
Nicco, M., Holley, E. A., Hartlieb, P., Kaunda, R., Nelson, P. P., 2018. Methods for characterizing cracks
induced in rock. Rock Mechanics and Rock Engineering , 51(7): 2075-2093.
Nicco, M., Holley, E.A., Hartlieb, P., Pfaff, K., 2020. Textural and mineralogical controls on
microwave-induced cracking in granites. Rock Mechanics and Rock Engineering, 53: 4745-4765.
Olasolo, P., Juárez, M. C., Morales, M. P., Liarte, I. A. 2016. Enhanced geothermal systems (EGS): A
review. Renewable and Sustainable Energy Reviews, 56: 133-144.
Ortega, O., Marrett, R., 2000. Prediction of macrofracture properties using microfracture information,
Mesaverde Group sandstones, San Juan basin, New Mexico. Journal of Structural Geology, 22: 571-
588
Rossi, E., Kant, M.A., Madonna, C., Saar, M.O., von Rohr, P.R., 2018. The effects of high heating rate
and high temperature on the rock strength: feasibility study of a thermally assisted drilling
method. Rock Mechanics and Rock Engineering, 51: 2957-2964.
Sano, O., Kudo, Y., 1992. Relation of fracture resistance to fabric for granitic rocks. Pure and Applied
Geophysics, 138: 657-677.
Siegesmund, S., Sousa, L. Knell, C., 2018. Thermal expansion of granitoids. Environmental Earth
Science, 77(2):1-29.
Sousa, L.M., del Río, L.M.S., Calleja, L., de Argandona, V.G.R., Rey, A.R., 2005. Influence of
microfractures and porosity on the physico-mechanical properties and weathering of ornamental
granites. Engineering geology, 77: 153-168.
Swanson, E., Wilson, J., Broome, S., Sussman, A., 2020. The Complicated Link Between Material
Properties and Microfracture Density for an Underground Explosion in Granite. Journal of
Geophysical Research: Solid Earth, 125. e2020JB019894.
Takemura, T., Golshani, A., Oda, M., Suzuki, K., 2003. Preferred orientations of open microcracks in
granite and their relation with anisotropic elasticity. International Journal of Rock Mechanics and
Mining Sciences, 40: 443-454.
Geopersia 2023, 13(1): 103-121 121
Tomašić, I., Lukić, D., Peček, N., Kršinić, A., 2011. Dynamics of capillary water absorption in natural
stone. Bulletin of Engineering Geology and the Environment, 70: 673-680.
Vázquez, P., Alonso, F.J., Esbert, R.M., Ordaz, J., 2010. Ornamental granites: Relationships between pwaves
velocity, water capillary absorption and the crack network. Construction and Building
Materials, 24: 2536-2541.
Wang, P., Xu, J., Liu, S., Wang, H., Liu, S., 2016. Static and dynamic mechanical properties of
sedimentary rock after freeze-thaw or thermal shock weathering. Engineering Geology, 210: 148-
157.
Winkler, E.M., 1997. Physical Properties of Stone. In Stone in Architecture. pp. 32-62. Springer, Berlin,
Heidelberg.
Wong, L. N. Y., Zhang, Y., & Wu, Z., 2020. Rock strengthening or weakening upon heating in the mild
temperature range? Engineering Geology, 272: 105619.
Xu, C., Sun, Q., Pan, X., Zhang, W., Wang, Y., 2019. Variation on thermal damage rate of granite
specimen with thermal cycle treatment. High Temperature Materials and Processes, 38(2019): 849-
855.
Yin, T., Li, Q., Li, X., 2019. Experimental investigation on mode I fracture characteristics of granite
after cyclic heating and cooling treatments. Engineering Fracture Mechanics, 222: 106740.
Yu, L., Peng, H. W., Zhang, Y., Li, G. W., 2021. Mechanical test of granite with multiple water–thermal
cycles. Geothermal Energy, 9(1): 1-20.
Zhang, F., Zhang, Y., Yu, Y., Hu, D., Shao, J., 2020. Influence of cooling rate on thermal degradation
of physical and mechanical properties of granite. International Journal of Rock Mechanics and
Mining Sciences, 129: 104285.
Zhang, W., Shi, Z., Wang, Z., Zhang, S. 2021. Identifying critical failure information of thermal
damaged sandstone through acoustic emission signal. Journal of Geophysics and Engineering, 18(4):
558-566.
Zhang, W., Sun, Q., Hao, S., Geng, J., Lv, C., 2016. Experimental study on the variation of physical and
mechanical properties of rock after high temperature treatment. Applied Thermal Engineering, 98:
1297–1304.
Zhao, G., Hu, Y., Jin, P., 2020. Exploratory Experimental Study on the Mechanical Properties of Granite
Subjected to Cyclic Temperature and Uniaxial Stress. Energies, 13(8): 2061.
Zhu, S., Zhang, W., Sun, Q., Deng, S., Geng, J., Li, C., 2017. Thermally induced variation of primary
wave velocity in granite from Yantai: experimental and modeling results. International Journal of
Thermal Sciences, 114: 320-326.