<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>Univrsity of Tehran Press</PublisherName>
				<JournalTitle>Geopersia</JournalTitle>
				<Issn>2228-7817</Issn>
				<Volume>5</Volume>
				<Issue>1</Issue>
				<PubDate PubStatus="epublish">
					<Year>2015</Year>
					<Month>03</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Influence of water and sand content on adhesion of clayey soils</ArticleTitle>
<VernacularTitle>تأثیر درصد آب و ماسه بر چسبناکی خاک‌های رس</VernacularTitle>
			<FirstPage>55</FirstPage>
			<LastPage>62</LastPage>
			<ELocationID EIdType="pii">54075</ELocationID>
			
<ELocationID EIdType="doi">10.7508/GEOP.2015.01.006</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Younes</FirstName>
					<LastName>Karami Aznadaryani</LastName>
<Affiliation>Department of Structural and Engineering Geology, School of Geology, College of Science, University of Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Akbar</FirstName>
					<LastName>Cheshomi</LastName>
<Affiliation>Department of Structural and Engineering Geology, School of Geology, College of Science, University of Tehran, Iran</Affiliation>
<Identifier Source="ORCID">0000-0002-0024-6161</Identifier>

</Author>
<Author>
					<FirstName>Amir</FirstName>
					<LastName>Khabbazi Basmenj</LastName>
<Affiliation>Department of Geology and Engineering Geology, Ferdowsi University of Mashhad, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Mohammad</FirstName>
					<LastName>Ghafoori</LastName>
<Affiliation>Department of Geology and Engineering Geology, Ferdowsi University of Mashhad, Iran</Affiliation>
<Identifier Source="ORCID">0000-0002-3650-9680</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2014</Year>
					<Month>09</Month>
					<Day>13</Day>
				</PubDate>
			</History>
		    <Abstract>Clogging occurs during mechanical tunneling with a Tunnel Boring Machine (TBM) because of adhesion of clayey soils to the cutterhead and conveyor system. The present study examined the effects of water and sand contents on clogging in Montmorillonite clayeysoil. Testing was carried out using an adhesion test device on 28 samples with different water and sand contents to determine adhesionstress and degree of clogging. The results indicate that the consistency index (Ic) of the samples decreases as the sand and watercontent increases. The results for variation of adhesion stress versus water content at different sand contents formed similar bellshapedcurves. In all graphs, an increase in sand content decreased adhesion stress. Adhesion stress increased until the water contentincreased to 138%, at which point it began to decrease. The results show that adhesion of the soil to the surface of the metal piston didnot occur in samples having a sand content of &gt;40% and in samples with &gt;133% water content having a sand content of &lt;40%, Ic&gt;0.5adhesion occurred.</Abstract>
			<OtherAbstract Language="FA">انسداد (Clogging) در حفاری مکانیزه با ماشین حفاری (TBM) به‌دلیل چسبیدن خاک رس به پیشانی برشی و ابزار تخلیة دستگاه رخ می‌دهد. تحقیق حاضر به بررسی تأثیر تغییر رطوبت و مقدار ماسه بر میزان انسداد در خاک رس مونتموریلونیت پرداخته است. آزمایش‌ها با دستگاه آزمایش چسبناکی (Adhesion test device) روی 28 نمونه با درصدهای مختلف ماسه و آب انجام شده و میزان تنش چسبناکی (Adhesion stress) و درجة انسداد (Degree of clogging) تعیین شده است. نتایج آزمایش‌ها نشان می‌دهد با افزایش درصد رطوبت و مقدار ماسه، شاخص استحکام (Consistency index) کاهش یافته است. منحنی تغییرات تنش چسبناکی در مقابل درصد رطوبت به‌ازای درصدهای مختلف ماسة زنگوله‌ای‌شکل است. در همة نمونه‌ها با افزایش درصد ماسه تنش چسبناکی کاهش یافت. با افزایش درصد رطوبت تا 138 درصد، تنش چسبناکی افزایش و بعد از آن کاهش یافت. نتایج نشان می‌دهد در نمونه‌هایی دارای درصد ماسة بیش از 40 درصد، رس به سطح فلز نمی‌چسبد و در نمونه‌های دارای درصد رطوبت بیش از 133 درصد و درصد ماسة کمتر از 40 درصد با شاخص استحکام بیش از 5/0  رس به سطح فلز چسبیده است. </OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">adhesion</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Clayey Soil</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Clogging</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">TBM</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">tunnel boring machine</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://geopersia.ut.ac.ir/article_54075_eb8bed3067b3945926b19a06a6655ce5.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
